Conventional Fire Alarm System

  • Asenware 4 Zone Fire Alarm Control Panel

    Asenware 4 Zone Fire Alarm Control Panel

    Asenware 4 Zone Fire Alarm Control Panel
    The AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2＆4 standard. And it is the central part of a conventional fire alarm system, designed for applications requiring a smoke detector, bell, manual pull stations, and sprinkler.

    KSh 18,000.00

  • Asenware 8 Zone Fire alarm control Panel

    Asenware 8 Zone Fire alarm control Panel

    Asenware 8 Zone Fire alarm control Panel

    The AW-CFP2166 series 8 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detectors, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit …

    KSh 25,000.00

  • Asenware sounder and flasher

    Asenware sounder and flasher

    Asenware sounder and flasher

    Asenware AW-CSS2166-5 Conventional Fire Strobe Sounder is a conventional type sound and light alarm, sound and light for short. It is an automatic fire alarm system output device, mainly through the alarm will sound and flash signal, suggesting that people fire.

     

    Buy at the Best and Discounted prices in Nairobi Kenya

    KSh 6,500.00

  • Inim Conventional Heat Detector ID200

    Inim Conventional Heat Detector ID200

    Inim Conventional Heat Detector ID200
    • Newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen
    • Bicolour LED: Red for alarm; Green slow flash for standby (optional) and fast flash for trouble (fault or high level of contamination in the optical smoke chamber)
    • Drift compensation for sensor drift caused by dust in the chamber
    • Sensitivity …

    KSh 1,900.00

  • AW-CTD321 Conventional Fix Temperature Heat Detector

    AW-CTD321 Conventional Fix Temperature Heat Detector

    Conventional Fix Temperature Heat Detector AW-CTD321 is a photo-electronic detector using a state-of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panels.
    1.Strong Adaptability For Circumstance
    2.SMT Design, High Stability
    3.40-60vdc Wide Voltage Operating Range
    4.Low Standby Current
    5.Power Supply Non-Polarized input
    6.Twin Led For 360 Visual
    7.Flashing Led Power Indicator
    8.Remote Led Indicator …

    KSh 1,900.00

  • C-TEC Standard 8 Zone Conventional Fire Alarm Panel C-TEC Standard 4 Zone Conventional Fire Alarm Panel

    C-TEC Standard 8 Zone Conventional Fire Alarm Panel

    C-TEC Standard 8 Zone Conventional Fire Alarm Panel

    • Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
    • Intuitive user-friendly interface with color-coded buttons and combined keypad/keyswitch entry.
    • Manufactured by C-TEC in the UK.
    • Eight detector zone circuits.
    • Four conventional sounder circuits.
    • Integral 1.5A EN54-4/A2 compliant …

    KSh 45,000.00

  • INIM Conventional control panel with 4 zones expandable to 20

    INIM Conventional control panel with 4 zones expandable to 20

    INIM Conventional control panel with 4 zones expandable to 20

    The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4) and a 4 zone model expandable to 36 zones (SmartLine036-4).

    KSh 22,000.00

  • ASENWARE Conventional Manual Call Point Push Station

    ASENWARE Conventional Manual Call Point Push Station

    The AW-CMC2166-6 conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches. The CMC2166-6 conventional manual call point is only used with conventional fire alarm control panel, it is forbidden to be used to other system

    Features

    1. These Manual call points are high reliability and easy installation.

    2. Available …

    KSh 4,500.00

  • Apollo Series 65 ionisation smoke detector

    Apollo Series 65 ionisation smoke detector(Conventional)

    Apollo Series 65 ionisation smoke detector (Conventional)
    • A high-quality ionisation smoke detector.
    • Uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chamber.
    • Certified to EN54-7 by the LPCB.
    • Wide 9-33V DC operating voltage.
    • Red LED illuminates when the detector is in alarm.
    • Requires a 45681-201APO diode base, 45681-200APO non-diode base or 45681-245APO …

    KSh 5,800.00

  • Hochiki Conventional Smoke Detector

    Hochiki Conventional Smoke Detector

    Hochiki Conventional Smoke Detector
    •  Removable, High Performance chamber
    •  Automatic Sensitivity Window Verification (ASWV) – Drift Compensation Technology
    • Remote Indicator output

    KSh 2,500.00

  • Hochiki Conventional heat detector

    Hochiki Conventional heat detector

    Hochiki Conventional heat detector
    • Electronic linear heat detection
    • Remote Indicator output
    • Wide voltage range (9.5 ~ 30 V dc)
    • Twin fire LEDs allow 360 degree viewing
    • Fixed Temperature Detector
    • Full range of mounting bases
    • Approved by LPCB & VdS
    • Also available in white

    KSh 2,500.00

  • Hochiki conventional sounder beacon

    Hochiki conventional sounder beacon

    Hochiki conventional sounder beacon

    Conventional wall sounder beacon with improved electronic design wich enables very low current consumption whilst providing a range of tones and volumens – selectable from the DIL switches on each unit. The unitis supplied with its own base, a shallow base (IP43) or a deep base (IP65).

    KSh 6,500.00