-
Honeywell Addressable Manual Call Point
Honeywell Addressable Manual Call Point
- Unique ‘Plug & Play’ installation concept
- Analogue addressable communications
- Fully compliant with EN54, Part 11
- Integral LED
-
Honeywell Morley DXc2 Addressable 2 Loop Fire Alarm Control Panel (Morley-IAS Protocol)
Honeywell Morley DXc2 Addressable 2 Loop Fire Alarm Control Panel (Morley-IAS Protocol)
- Two Loop Control Panel, 230Vac, 2 sounder circuits.
- Supports the Morley-IAS protocol
- Dims 391.5 x 390 x 147 (H x W x D)
- Network up to 16 loops (16×1 loop panels, 8×2 loop panels, 4×4 loop panels or any mix up to max 16 loops)
- True peer-to-peer and …
-
Asenware AW‑D102 Addressable Heat Detector
Asenware AW‑D102 Addressable Heat Detector
Asenware AW‑D102 Addressable Heat Detector: The Asenware AW-D102 is an intelligent addressable heat detector designed for use with addressable fire alarm systems such as the AW-FP100 series fire alarm control panels. Each detector is assigned a unique address (ID) so the fire alarm panel can continuously monitor the exact location and status of every detector in the …
-
Asenware AW‑D101 Addressable Smoke Detector
Asenware AW‑D101 Addressable Smoke Detector
The Asenware addressable smoke detector is an intelligent fire detection device designed to work with an addressable fire alarm control panel. Each detector can be assigned a unique address (ID), allowing the control panel to continuously monitor the status and location of every connected device in the system.
When smoke is detected, the …
-
Asenware AW‑FP201 Addressable Fire Alarm Control Panel
Asenware AW‑FP201 Addressable Fire Alarm Control Panel
The Asenware AW‑FP201 Addressable Fire Alarm Control Panel is an intelligent fire detection and alarm system designed to monitor buildings for signs of fire such as smoke, heat, or manual alarm activation. It serves as the central control unit of an addressable fire alarm system, receiving signals from connected detectors and modules …
-
Zeta Addressable Heat Detector
Zeta Addressable Heat Detector
– Designed to meet EN54 requirement
– Lockable to base to stop unauthorized removal
– Remote LED output
– 8 LEDs for improved, 360° visibility
– Compatible with all Fyreye MkII bases
– Addressed with dip switches or hand-held Programmer
-
Zeta Addressable Smoke Detector
Zeta Addressable Smoke Detector
- Addressed with dip switches or hand-held programmer
- Lockable to base to stop unauthorized removal
- Compatible with all Fyreye MkII bases
- Designed to meet EN54 requirement
- 8 LEDs for improved, 360° visibility
- Remote LED output
-
Zeta Addressable Manual Call Point
Zeta Addressable Manual Call Point
- EN54-11 approved
- Waterproof IP67 version available
- Glass Appearance maintains operaator deterrence
- Positive activation that mimics the feel of breaking glass
- Visible warning flag confirms activation
- Simple key to reset operating element (no broken glass)
- Complete functional test with every activation
-
Morley Honeywell Grey DXc4 4 Loop Fire Alarm Panel
Morley Honeywell Grey DXc4 4 Loop Fire Alarm Panel
- Four Loop Control Panel, 230Vac, 2 sounder circuits.
- Supports the Morley-IAS protocol
- Dims 391.5 x 390 x 147 (H x W x D)
- Network up to 16 loops (16×1 loop panels, 8×2 loop panels, 4×4 loop panels, or any mix up to max 16 loops)
- True peer-to-peer and fault-tolerant …
-
Ctec 1 Loop Addressable Fire Panel
Ctec 1 Loop Addressable Fire Panel
- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).
- Compatibility with Apollo’s XP95/Discovery protocol.
- Two independently programmable conventional sounder circuits.
- Two programmable inputs.
- A fault output relay and three programmable relay outputs with voltage free changeover contacts.
- A selection of zone dependency/coincidence functions.
- A day/night (building occupied/unoccupied) function.
- An …
-
Asenware 4 Zone Fire Alarm Control Panel
Asenware 4 Zone Fire Alarm Control Panel
The AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard. And it is the central part of a conventional fire alarm system, designed for applications requiring a smoke detector, bell, manual pull stations, and sprinkler. -
Asenware 8 Zone Fire alarm control Panel
Asenware 8 Zone Fire alarm control Panel
The AW-CFP2166 series 8 Zone conventional fire alarm panel is designed based on EN54 part 2&4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detectors, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit …
Fire Detection and Alarm System
Showing 1–12 of 82 resultsSorted by popularity