-
XFP 1 Loop 16 Zone Addressable Fire Panel (XP95/Discovery protocol)
XFP 1 Loop 16 Zone Addressable Fire Panel (XP95/Discovery protocol)
- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).
- Compatibility with Apollo’s XP95/Discovery protocol.
- Two independently programmable conventional sounder circuits.
- Two programmable inputs.
-
Inim Conventional Heat Detector ID200
Inim Conventional Heat Detector ID200
- Newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen
- Bicolour LED: Red for alarm; Green slow flash for standby (optional) and fast flash for trouble (fault or high level of contamination in the optical smoke chamber)
- Drift compensation for sensor drift caused by dust in the chamber
- Sensitivity …
-
Asenware Smoke Detector AW-CSD311
Asenware Smoke Detector AW-CSD311
AW-CSD311 is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
-
AW-CTD321 Conventional Fix Temperature Heat Detector
Conventional Fix Temperature Heat Detector AW-CTD321 is a photo-electronic detector using a state-of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panels.
1.Strong Adaptability For Circumstance
2.SMT Design, High Stability
3.40-60vdc Wide Voltage Operating Range
4.Low Standby Current
5.Power Supply Non-Polarized input
6.Twin Led For 360 Visual
7.Flashing Led Power Indicator
8.Remote Led Indicator … -
Conventional Sounder with Flasher
Conventional Sounder with Flasher
Acoustic and visual alarm indicator approved according to new EN54-23 standard, IP65 protection rated (deep base version only), Operating voltage from 17 to 60 Vdc, mounting base included.
The selectable tone among 32 available by means of DIP SWITCH, flashing frequency selectable at 0,5Hz / 1Hz (by means of DIP SWITCH), 2 selectable sound level
-
Inim conventional Manual Call Point
Inim conventional Manual Call Point
- Manual callpoint with resettable element operated by plastic key (included).
- Warning flag and LED confirmation of activation.
- Selectable resistance.
-
C-TEC Standard 8 Zone Conventional Fire Alarm Panel
C-TEC Standard 8 Zone Conventional Fire Alarm Panel
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
- Intuitive user-friendly interface with color-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Eight detector zone circuits.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant …
-
INIM Conventional control panel with 4 zones expandable to 20
INIM Conventional control panel with 4 zones expandable to 20
The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4) and a 4 zone model expandable to 36 zones (SmartLine036-4).
-
Ctec EP203 Automatic Extinguisher Panel
Ctec EP203 Automatic Extinguisher Panel
- Certified to EN54-2/4 and EN12094-1 by the Loss Prevention Certification Board (LPCB)
- Functions as a standard 3 zone fire panel with additional circuitry for controlling the release of fire-suppressing gas.
- 128 x 64 pixel display.
- Any combination of activated zones can be programmed to automatically start the panel’s extinguishant release sequence.
- Manual release button and …
-
Rotary AC Warning Light
Rotary AC Warning Light
Warning lights are used to send a signal to neighbors when in danger.
- Rotating Parabolic Reflector: For enhanced visibility from a distance.
- Extended Bulb Life: Vibration-resistant automobile bulb.
- Installation: Indoors—upright, inverted, sideways; Outdoors—upright only.
- Dome: Superior weather resistant and light translucent acrylic resin.
- Compliance: For 12V DC, 24V DC type only.
- Colors: Red
-
Fire Alarm Loop Isolation Module
Fire Alarm Loop Isolation Module
- DIN rail mounting option
- Surface mounting option
- Plug in connectors
- Tri-colour LED status indication
- Address selector switches visible in 2 planes
- LED status visible in 2 planes
- Approved to GEA GEI 1-082 and CEA GEI 1-084
-
ASENWARE Conventional Manual Call Point Push Station
The AW-CMC2166-6 conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches. The CMC2166-6 conventional manual call point is only used with conventional fire alarm control panel, it is forbidden to be used to other system
Features
1. These Manual call points are high reliability and easy installation.
2. Available …
Fire Detection and Alarm System
Showing 25–36 of 85 resultsSorted by popularity